| |
PIPE
2000 now have a range of flexible pre-insulated copper pipes for
use with all water systems, including heating, hot and cold-water
services, chilled water and other suitable fluids.
Pipes are available as single or two pipe jointless
systems, offering substantial savings over more conventional pipe
systems requiring couplings and the application of insulation on
site.
|

All pipes supplied on a coil
|
|
Copperflex
® is designed for smaller pipe systems using copper pipes between
15mm and 35mm. The pipes are fully and continuously insulated with
CFC- and HCFC-free flexible polyurethane foam and a tough outer
casting of polyethylene. These pipes can be pulled to a very good
radius to facilitate entry in and out of buildings and for use in
floor ducts and risers.
The pipes are suitable for either below or above
ground applications and in service ducts and shafts. When used below
ground with solid backfill there are no requirements for expansion
joints, anchors or guides and although pre-insulated with a tough
outer polyethylene casing, the pipes can still be pulled to a very
good radius to facilitate entry in and out of building and for use
in floor ducts and risers. |